VTech 4 Handset DECT 6.0 Expandable Cordless Telephone with Answering System & Handset Speakerphone Manual de usuario

User’s manualEL52100/EL52110DECT 6.0 cordless telephone/answering system with caller ID/ call waiting

5Getting startedBattery installation and chargingBattery installationInstall the battery as shown below.IMPORTANT INFORMATION:Use only the supplied re

6Getting startedBattery installation and chargingBattery chargingOnce you have installed the battery, the screen indicates the battery status (see the

7Getting startedWall mount installationThe telephone base comes ready for tabletop use. If you want to mount your telephone on a wall, use the provide

8Getting startedWall mount installationPlug the other end of the telephone line cord into the telephone wall jack. Plug the large end of the larger po

9Getting startedWall mount installationWall mount to tabletop installationTo change the telephone base from the wall mount installation to tabletop in

10Menu overviewUse the menu to change the telephone settings.Press MENU/SELECT in idle mode (when the handset is not in use) to enter the main menu.Pr

11Telephone settingsHandset settingsRinger volumeYou can set the handset ringer volume level (1-6), or turn the ringer off. When the ringer is off,

12Telephone settingsHandset settingsVoicemail waiting (visual message waiting) indicatorIf you subscribe to a voicemail service offered by your teleph

13Telephone settingsHandset settingsKey toneThe handset is programmed to beep with each key press. You can turn KEY TONE off, so there are no beeps w

14Telephone settingsHome area codeIf you dial seven digits to make a local call (no area code required), enter your area code into the telephone as th

© 2009-2011 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licens

15Telephone settingsUse the answering system menu of a system handset to turn on or off the answering system, record your announcement, activate the c

16Telephone settingsTo delete your announcement:Follow Steps 1 through 4 in To play the current announcement on page 15 to play the announcement.Press

17Telephone settingsCall screening setupYou can choose whether incoming messages are played through the speaker on the telephone base while they are b

18Telephone settingsAnswering system settingsRemote access codeTo access your answering system remotely from any touch-tone telephone, you need to ent

19Telephone settingsWhen the telephone is not in use, press VOLUME on the telephone base to set the ringer volume level (1-5), or turn the ringer off

20Making, answering and ending a callMaking a callTo make a call:Press PHONE/FLASH, then wait for the dial tone. -OR- Press SPEAKER to use the speak

21Telephone operationAnswering a callPress any dial pad key (known as Any Key Answer) or PHONE/FLASH.-OR-Press SPEAKER to use the speakerphone.Speake

22Telephone operationRedialThe handset stores the 20 numbers most recently called in the redial list.To review numbers in the redial listPress REDIAL/

23Telephone operationTo delete a number in the redial listWhile reviewing a number in the redial list, press DELETE to delete the displayed number fro

24Telephone operationOptions while on callsVolume controlWhile on a call, press DIR/VOLUME to increase or press CID/VOLUME to decrease the listening

Parts checklistYour telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is ne

25Telephone operationOptions while on callsTemporary tone dialingIf you have pulse (rotary) dialing service only, you can temporarily switch from puls

26Telephone operationOptions while on callsTo access the redial list number while on a call:Press REDIAL/PAUSE The screen shows the number most recent

27Telephone operationIf you misplace the handset, use the handset locator feature on the telephone base to find it.To start the paging tone:Press HAN

28Directory overviewDirectory memory capacityThe directory can store up to 100 entries, with a maximum of 15 alphanumeric characters (including spaces

29DirectoryCreating directory entriesTo create a new directory entryPress MENU/SELECT in idle mode.Press DIR or CID to scroll to >DIRECTORY, then

30DirectoryThe first letter of every word is capitalized. The remaining letters in a word start as lower case letters as shown in the character chart

31DirectoryReviewing the directoryTo review directory entriesPress DIR when in idle mode to show the first entry in the directory. DIRECTORY EMPTY ap

32DirectoryYou can dial, delete or edit the displayed directory entry.See To review directory entries or To search by name on page 31 to show an entry

33DirectorySpeed dial locationsTo assign or reassign a directory entry to a speed dial locationPress MENU/SELECT in idle mode.Press DIR or CID to sc

34DirectoryTo dial a speed dial numberWhen in idle mode, press and hold a dial pad key (0 through 9) to choose the desired speed dial entry.Press PH

iUser’s manualEL52100/EL52110DECT 6.0 cordless telephone/answering system with caller ID/ call waitingTable of contentsGetting startedQuick reference

35About caller ID11/20Christine Smith888-722-770210:30PMCaller IDThis product supports caller ID services offered by most telephone service providers.

36Caller IDHow caller ID history (call log) worksThe telephone stores caller ID information about the last 50 incoming calls in the telephone base. Ea

37Caller IDMissed (new) calls indicatorWhen you have calls that have not been reviewed, the handset idle screen shows XX MISSED CALLS.All entries that

38Caller IDCaller ID operationTo review the caller ID historyReview the caller ID history to find out who called, to return the call or to copy the ca

39Caller IDCaller ID operationTo dial a caller ID history numberWhile reviewing the caller ID history, press DIR or CID to browse through the caller

40Caller IDCaller ID operationSaving a caller ID history entry in the directoryWhile reviewing the caller ID history, press DIR or CID to browse thr

41Answering system and voicemailYour telephone has separate indicators for two different types of voice messages: those left on its built-in answering

42Answering systemAnswering system overviewVoice promptsThe system provides voice prompts to guide you through recording announcements and remote acce

43Answering systemCall interceptWhile call screening, you can press PHONE/FLASH or SPEAKER on the handset to stop recording and speak to the caller.

44Answering systemMessage playbackTo listen to messagesYou can use the handset or the telephone base to play messages. If there are new messages, the

iiReviewing the directory ...31To review directory entries ...31To search by name

45Answering systemOptions during playbackWhen a message is playing, you can adjust the playback volume, skip, repeat, or delete the message.When messa

46Answering systemTo delete all old messagesUse this feature to delete all old messages. Once messages are deleted, you cannot retrieve them. New (unh

47Answering systemRecording and playing memosMemos are messages you record yourself. They are saved, played back and deleted exactly like incoming mes

48Answering systemMessage window displaysThe message window on the telephone base displays the total number of messages. See the table below for other

49Answering systemRemote accessYou can access the answering system remotely by dialing your home telephone number from any touch-tone telephone.To rem

50Answering systemRemote accessHang up to end the call and save all messages.There is a wallet card listing the remote commands at the back of this us

51Screen icons, indicator lights and alert tonesHandset indicator lightsCHARGE lightOn when the handset is charging in the telephone base.Backlight (l

52AppendixTelephone base indicator lights ANS ON/OFF lightOn when the built-in answering system is on.IN USE lightOn when the handset is in use or whe

53AppendixCALL LOG EMPTY You are accessing an empty caller ID history.DIRECTORY EMPTY There are no directory entries.DIRECTORY FULL The directory is f

54AppendixUNABLE TO SAVE You cannot save a caller ID history entry without a number to the directory.XX MISSED CALLS There are new calls in the caller

1Install the telephone base close to a telephone wall jack and an electrical outlet not controlled by a wall switch. The telephone base can be placed

55AppendixTroubleshootingIf you have difficulty with your telephone, please try the suggestions below. For customer service, or to purchase accessorie

56AppendixTroubleshootingCheck that all the telephones connected to the same telephone line are hung up.Make sure to set the dial mode to the correct

57AppendixTroubleshootingThe batteries do not hold a charge.If the cordless handset is in the telephone base and the charge light does not come on, re

58AppendixTroubleshootingMove your telephone to a higher location. The telephone will likely have better reception when installed in a high area.If th

59AppendixTroubleshootingMove your telephone base to a higher location. The telephone will have better reception when installed in a high area.If the

60AppendixTroubleshootingYour telephone line cord might be defective. Try installing a new telephone line cord.My caller ID isn’t working.Caller ID is

61AppendixTroubleshootingIf the caller pauses for longer than seven seconds, the answering system stops recording and disconnects the call.If the answ

62AppendixTroubleshootingThe answering system may not detect the remote access code while your announcement is playing. Try waiting until the announce

63AppendixCommon cure for electronic equipment:If the telephone is not responding normally, try resetting it. Do the following in the order listed:Dis

64AppendixMaintenanceTaking care of your telephoneYour cordless telephone contains sophisticated electronic parts, so it must be treated with care.Avo

2Getting startedQuick reference guideREDIAL/PAUSEPress repeatedly to view the last 20 numbers dialed (page 22).While entering numbers, press and hol

65AppendixImportant safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s man

66AppendixImportant safety informationElectrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet

67AppendixFCC Part 68 and ACTAThis equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Coun

68AppendixFCC Part 15This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federa

69AppendixLimited warrantyThe AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product

70AppendixHow do you get warranty service?To obtain warranty service in the United States of America, visit www.telephones.att.com or call 1 (800) 22

71AppendixTechnical specificationsRF frequency band 1921.536MHz — 1928.448MHzChannels 5Operating temperature 32°F — 122°F 0°C — 50°CTelephone base vol

72AppendixIndexAAlert tones, 52Alphabetical search, 31Announcement, 15Answer a call, 21Answering mode, 16Answering system, 41–50Answering system and v

73AppendixMemory match, 36Menu, 10–18Message alert tone, 18Message playback, 44Message window displays, 48Missed (new) calls indicator, 37Mute, 24NNum

AppendixFold here.Cut along dotted line.Action Remote commandPlay all messages ...1Play new messages ...2Delete the

3Getting startedUsing menusPress MENU/SELECT to enter the main menu.Press DIR or CID to scroll through menu items.Press MENU/SELECT to select or mod

© 2009-2011 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property license

4Getting startedIf you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL fi